Wheelbarrow mixer equipped with easy-to-clean thick polyethylene drum
Tubular steel frame is mounted with 16" pneumatic tires
Handles slide forward for storage
Drum maximum batch capacity of 2 cu. ft.
1725 RPM
.5 HP Electric 115v motor
Rent from $40.00
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.
Powered by a 4.5-amp electric motor
Permanently lubricated oversized head bearings for unmatched durability
Hose can be extended to 45 feet (13.5 meters)
Waterproof control box
Optional 50- and 100-foot (15, 30 meters) extension cords available
Requires high-cycle generator GDP5H
Rent from $45.00
Cut a wide variety material with the versatile 14 in. Multi-Cutter Saw that utilizes a carbide-tipped blade to maintain a consistent depth-of-cut to throughout the blade life.
Rent from $40.00
The TS 420 is so popular, it could possibly be called "the standard" to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable, and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 —including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14" cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features.
Patented technology keeps the TS 420 working longer than previous units.
Rent from $50.00
Versatile rear-handle 70 cc gas saw with auto-choke - cutting depth up to 5" with a 14" blade
Motor cylinder: 68.7 cm³
Rated power: 3.5 kW
Wet or dry operation: Wet and Dry
Rent from $50.00
The TS 420 is so popular, it could possibly be called "the standard" to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable, and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 —including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14" cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features.
Rent from $85.00
The EDCO SK-14-13H 14" Walk Behind Saw is a Heavy Duty Down Cut 14" Capacity Concrete/Asphalt Saw with no sacrifice in performance and built for the Pro's.
Rent from $60.00
Versatile diamond coring machine for handheld or rig-based coring from 8-162 mm (5/16 - 6-3/8") in diameter
Diameter range: 5/16 - 6-3/8 in
Base material: Concrete, Reinforced concrete, Asphalt, Masonry
Operation mode: Hand-held or rig-mounted drilling system
Rent from $60.00
Versatile breaker for demolishing or chiseling floors and occasional wall applications (with universal power cord)
Working direction: Floor, Wall
Tool chuck type: TE-S
Weight according EPTA-Procedure 01/2003 without battery: 27.6 lb.
Features
High versatility - in-line design for floor breaking and ergonomic side handle for occasional wall breaking
Maintenance-free brushless SR motor and triple-chamber lubrication systems for longer service intervals and tool lifetime
Exceptionally low tool vibration due to Hilti AVR sub-chassis (Active Vibration Reduction) system
Detachable supply cord for fast and easy replacement of damaged/broken supply cords on the jobsite
Optional TE DRS-B dust removal system, which collects up to 95% of dust
Applications
Demolishing concrete and masonry at floor level or below waist level
Renovating floors of all kinds
Removing tiles, bushing and compacting
Corrective chiseling, such as adjustments to door and window openings
Rent from $50.00
Powerful and extremely light TE-S breaker for concrete and demolition work
Working direction: Floor
Tool chuck type: TE-S
Weight according EPTA-Procedure 01/2003 without battery: 32 lb.
Rent from $60.00
Exceptionally powerful breaker for heavy-duty concrete demolition, asphalt cutting, earthwork and driving ground rods
Working direction: Floor
Tool chuck type: TE-H (Hilti HEX 28)
Weight according EPTA-Procedure 01/2003 without battery: 59.7 lb.
Rent from $60.00
Our most popular mid-size trowel. Reliability and performance are trademarks of this industry-proven trowel.
36-inch (915 mm) guard ring diameter
Trowel covered by 1-year limited warranty
Front access panel provides quick access to trowel arms and blades
Center mount lifting bale included
Spider and thrust collar assembly design simplifies routine maintenance
Gearbox features top quality components & large oil capacity for years of trouble-free performance
Optimally balanced for smooth finishing
Handles available with either QuickPitch or Standard (knob type) pitch control
Rent from $50.00